Cisco Systems OL-31386-01 4 , 5

4 Unpacking

To unpack the access point, follow these steps:

Step1 Unpack and remove the access point and the accessory kit from the shipping box.

Step2 Return any packing material to the shipping container and save it for future use.

Step3 Verify that you have received the items listed below. If any item is missing or damaged, contact

your Cisco representative or reseller for instructions.

–

The access point

–

Mounting bracket (only if selected when you ordered the access point)

–

Adjustable ceiling-rail clip (only if selected when you ordered the access point)

5 Configurations

The 2700 series access point contains two simultaneous dual-band radios, the 2.4-GHz MIMO radio

and the 5-GHz 802.11ac MIMO radio.

The 2700 series access point’s configurations are:

•AIR-CAP2702E-x-K9, AIR-AP2702E-UXK9—two 2.4-GHz/5-GHz dual-band radios, up to 4

external dual-band dipole antennas

•AIR-CAP2702I-x-K9, AIR-AP2702I-UXK9—two 2.4-GHz/5-GHz dual-band radios, with

integrated dual-band antennas

For information on the regulatory domains, see “Regulatory Domains” section on page 7.

The 2702E model is configured with up to four external dual-band dipole antennas, and two 2.4-GHz/

5-GHz dual-band radios. The radio and antennas support frequency bands 2400–2500 MHz and

5180–5865 MHz through a common dual-band RF interface. Features of the external dual-band

dipole antennas are:

•Four RTNC antenna connectors on the top of the access point

•Four TX/RX antennas

These antennas are supported on the 2702E:

•AIR-ANT2524DB-R