Agency Approvals
Agency Approvals
Table 1 lists the safety and electromagnetic interference (EMI) standards that apply to the Cisco SB 100 series routers.
Table 1 Safety and EMI Standards for the Cisco SB 100 Series Routers
Safety Standards | EMI Standards |
|
|
UL 60950, CSA 60950 | CFR47 part 15 subpart B, 2000 class B |
|
|
IEC, EN 60950:1992 with | EN55022, EN550: EN61000 series |
Amendments A1 through A4 and |
|
A11, AS/NZ5 3260 |
|
|
|
Table 2 lists the agency approvals of telecom standards that apply to the Cisco SB 100 series routers.
Table 2 Telecom Standards for the Cisco SB 100 Series Routers
Telecom Standards
FCC part 68/TIA 968
Directive 1999/5/EC, CTR3
JATE, NTT
TS013, TS031
PTC 231
FCC Part 68 Notice
This equipment complies with Part 68 of the FCC rules and the Technical Requirements for Connection to the Telephone Network published by ACTA. On the bottom of the this equipment is a label that contains, among other information, a product identifier in the format US:5B1MFNA0013. If requested, this number must be provided to the telephone company.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications to maintain uninterrupted service.
If you have trouble with this equipment, please contact Cisco Systems for repair and warranty information. If the trouble is causing harm to the telephone network, the telephone company can request that you remove the equipment from the network until the problem is resolved.
Normally, this equipment will be used in conjunction with FCC approved equipment that limits the Encoded Analog Content that provides the required Billing Protection.
Cisco SB 100 series routers that bear the labeling identification number US:5BMFMAM0013 comply with the following requirements:
•FCC Rules and Regulations 47 CFR Part 68
Regulatory Compliance and Safety Information for Cisco SB 100 Series Routers
20 |
| |
|
