Cisco Systems SBC-111 manual SBC-115, Detailed Steps, Command or Action, Purpose, Example

Implementing SBC Redundancy (High Availability)

How to Implement Redundancy

DETAILED STEPS

	Command or Action	Purpose
Step 1	configure	Enables global configuration mode.
	Example:
	RP/0/0/CPU0:router# configure
Step 2	sbc service-name	Enters the mode of an SBC service.
		• Use the service-nameargument to define the name of
	Example:	the service.
	RP/0/0/CPU0:router(config)# sbc mysbc
	RP/0/0/CPU0:router(config-sbc)#
Step 3	service-location preferred-active node-id	Enables a service card to run SBC function as a primary and,
	[preferred-standby node-id]	optionally, secondary location.
	Example:
	RP/0/0/CPU0:router(config-sbc)#
	preferred-active 0/2/CPU0
Step 4	commit	Saves configuration changes. Use the commit command to
		save the configuration changes to the running configuration
	Example:	file and remain within the configuration session.
	RP/0/0/CPU0:router(config-sbc)# commit
Step 5	exit	Exits sbc mode to config mode.
	Example:
	RP/0/0/CPU0:router(config-sbc)# exit
	RP/0/0/CPU0:router(config)#
Step 6	interface sbcnumber	Enters the mode of an SBC interface, creating it if necessary.
		The number argument must be a value between 1 and 2000.
	Example:
	RP/0/0/CPU0:router(config)# interface sbc1
	RP/0/0/CPU0:router(config-if)#
Step 7	service-location preferred active node-id	Enables a service card to run SBC function as a primary and,
	[preferred standby node-id]	optionally, secondary location.
	Example:
	RP/0/0/CPU0:router(config-if)# preferred-active
	0/2/CPU0
Step 8	commit	Saves configuration changes. Use the commit command to
		save the configuration changes to the running configuration
	Example:	file and remain within the configuration session.
	RP/0/0/CPU0:router(config-if)# commit

Cisco IOS XR Session Border Controller Configuration Guide

SBC-115