Cisco Systems SFS 7000P manual Secure fasteners with a number 1 Phillips screwdriver

Chapter 3 Installing Field Replaceable Units

Installing a Power Supply or Fan Unit

Figure 3-2 Removing the Power Supply from the Switch

154011

Step 4 Insert the new power supply or fan unit into the open slot until it is fully seated. You may need to push the unit with your thumbs to get it completely into the bay.

Step 5 Secure fasteners with a number 1 Phillips screwdriver.

Step 6 Check the LEDs to verify the status of the module.

For more information, see the “Power Supply and Fan LEDs” section on page 4-3.

	Cisco SFS 7000P InfiniBand Server Switch Hardware Installation Guide, Release 2.5.0
OL-9167-01 Rev. A0		3-4