Cisco Systems SN 5428-2 manual Configuration Tasks

Chapter 9 Configuring Authentication

Configuration Tasks

Table 9-1 Authentication Services (continued)

Authentication
Service	Description	Authentication Types
Local or	Uses a local username database on the storage router	Login and iSCSI
Local-case	for authentication. Local-case indicates that the user	authentication only
	name authentication is case-sensitive. Passwords
	authentication is always case-sensitive.
Enable	Uses the Administrator mode password configured for	Enable and Login
	the storage router.	authentication only
Monitor	Uses the Monitor mode password configured for the	Enable and Login
	storage router.	authentication only

Configuration Tasks

To configure iSCSI, Enable or Login authentication and the associated authentication services on the storage router, perform the following steps:

Step 1 Configure the desired authentication services, such as RADIUS, TACACS+ and the local username database.

Step 2 (Optional) Create named groups of RADIUS and TACACS+ servers.

Step 3 Create authentication lists.

Step 4 (Optional) Test authentication using configured authentication services.

Step 5 (Optional) Configure the user name and password for SCSI routing instances that will participate in two-way authentication.

Step 6 Enable authentication for individual SCSI routing instances.

Step 7 Verify and save AAA and iSCSI authentication configuration.

Figure 9-1illustrates AAA configuration elements used for iSCSI authentication and Figure 9-2illustrates the example configuration of iSCSI authentication and the authentication services used in this chapter.

Cisco SN 5428-2 Storage Router Software Configuration Guide

9-4 OL-5239-01