HP J3250M Switches Managing, Configuration - IP Configuration, Configuration - System Information, Figure 7-3.Switch IP Configuration

Managing Switches

Configuration

Configuration - System Information

The System Information page lets you enter a system name for the device, the location of the device, and whom to contact in the event of a problem.

Configuration - IP Configuration

Select the way that you want IP addresses configured for your network:

■Manual - Set the IP address through the console.

■Disabled - IP is disabled, there is no access to management or telnet. Not Recommended.

■Use Bootp - The Bootp (or DHCP) protocol sets the IP address automat­ ically.

If you select Manual configuration, you can change the IP address, a subnet mask, and a default gateway for the device.

Some switches let you configure an IP address for every VLAN you have created.

Switches Managing

Figure 7-3. Switch IP Configuration

7-7