HP J3250M manual Required Patches, Before Installing HP Hub & Switch Management

Hub &	for OV-
Installing HP	Management
Before	Switch

Before Installing HP Hub & Switch Management for OV-UX

Required Patches

Required Patches

The following patches must be installed before installing HP Hub & Switch Management for OV-UX. Contact your HP Authorized Dealer or the nearest HP Sales and Support Office, or download the patches from the HP Electronic Support Center. The URL is:

http://us-support2.external.hp.com

The two patches are:

■For HP-UX 10.20 — PHSS_15043 S700_800 10.x HP aC++ runtime library components (A.01.15)

■For HP-UX 11.00 — S700_800 11.00 HP aC++ runtime library components (A.03.10)

Before Installing HP Hub & Switch

Management

Before you can begin installing HP Hub & Switch Management, you must have successfully completed installing your Network Node Manager product. See the HP OpenView Network Node Manager Products Installation Guide for instructions on installing the HP Network Node Manager and obtaining your software license.

You may set up multiple manager stations on your network. Each manager on which you install the manager product set does its own polling, so the manager traffic on your network will increase in proportion to the number of managers.

Note: This applies only if you buy multiple copies. Your license only entitles you to install one copy.

If you are installing this product set on a workstation with an existing application, be sure you first exit any ovw sessions currently running, then stop all HP OpenView processes using the ovstop command (available to root user).

2-4