Accessing Hub Features

Configuring Your Device

If the device you selected is not manageable by browser, you can only manage it from the management workstation.

Accessing Hub Features

Figure 6-2. 10Base-T Hub-12M Device View

You can enable and disable individual ports (click on the port to select it), or click on the Select All Ports button to enable or disable all the ports of a device in one step.

For the switching hub, select a hub or card from the stack using the drop down list at the top. The Closeup View for that hub or card will display.

To move selected ports to a particular segment:

1.Select the Move Selected Ports to Segment button.

2.Select a hub from the drop down list, then select the segment that you want to move the port to.

3.Click on Apply Settings.

Click on the link “meaning behind the port icons” to view the port indicator legend.

Configuration - Fault Detection

The automatic fault detection feature protects your network from failing because of problems such as network loops, defective cables, transceivers

6-6

Page 40
Image 40
HP J3250M manual Configuration Fault Detection, Base-T Hub-12M Device View