HP J3250M manual Stopping and Restarting the Manager Application, Stopping the Manager

Running HP Hub & Switch Management

Running HP Hub & Switch Management

Stopping and Restarting the Manager Application

Table 4-1.	OpenView Menu Items
OpenView		Menu Item added by	Description
Menu		HP Hub & Switch
		Management
Options		HP Hub & Switch	Runs the HP Admin utility for setting Hub &
		Admin	Switch Management parameters.

Note: For information on setting up network devices for IP operation,

see Appendix A.

Stopping and Restarting the Manager

Application

Stopping the Manager

Stopping the manager consists of:

1.Exiting the manager’s graphical network map and user interface, and

2.Optionally stopping the manager’s background processes.

To exit from the network map and interface (ovw), select Exit in the map’s File menu.

If you want the manager to continuously collect data and monitor changes even when the map and interface are not up (that is, even if you exit from ovw), do step 1 and not step 2. The background processes—netmon, trapd, ovwdb, ovtopmd, and snmpCollect—will continue to run and you need only run /opt/OV/bin/ovw to return to the map and interface. For more information on these background processes, refer to the HP OpenView Network Node Manager Reference manual or read the man page for the process.

If you want to stop the background processes, use the command /opt/OV/ bin/ovstop. Using ovstop without arguments stops all of the processes—netmon, trapd, ovwdb, ovtopmd, and snmpCollect—in the correct order.

4-4