HP J3250M Appendix A, Agent Firmware Versions, network, AppendixA, non-network, Verifying Device Agent Versions

Appendix A

Agent Firmware Versions

A

Appendix A

Appendix A contains the following topics:

■Agent Firmware Versions

■Preparing Network Devices

■Globally Assigned IP Network Addresses

■Configuring IP Parameters

Agent Firmware Versions

HP Hub & Switch Management communicates with network devices using SNMP (Simple Network Management Protocol).To access device features, each network device must contain a compatible version of agent software or firmware.

Note: The latest firmware agents can be obtained from the Support section of the HP networking Web page. The URL is:

http://www.hp.com/go/network_city

Verifying Device Agent Versions

You can check the agent version on an HP device using one of the following methods:

■Use the device’s console port interface (a non-networkconnection).

You can connect a terminal or computer directly to the device or through a modem. Refer to the device’s Installation and Reference Guide for use of the device’s RS-232 console port.

•For HP devices, you can use an ASCII terminal or computer with VT 100 terminal emulation.

■Use an available network application (a network connection).

AppendixA

A-1