HP J3250M manual Rebooting a Device

Performing Diagnostics

Rebooting a Device

Performing Diagnostics

Figure 9-1. Ping/Link Test

The number of successes or failures of the test packets reaching the Destination IP or MAC Address are displayed at the top of the page. A failure means that either the device at the destination address did not respond within the timeout specified, or the data returned from the device indicated an error.

The Defaults button will reset the Number of Packets to Send and the

Timeout value to the default values of 10 packets and 1 second, respectively.

Rebooting a Device

Rebooting the device is the same as powering off the device. Network operation will be interrupted while the device initializes.

9-2