Intel G4H875-B Onboard Serial Port 3 G4H875-N only, Onboard Serial Port 3 IRQ G4H875-N only

3 BIOS Setup

Onboard Serial Port 3 (G4H875-N only)

This field is used to select the serial port 3’s I/O address.

Onboard Serial Port 3 IRQ (G4H875-N only)

This field is used to select the serial port 3’s IRQ address. This field is not configurable if the “Onboard Serial Port 3” field is set to Disabled.

Onboard Serial Port 4 (G4H875-N only)

This field is used to select the serial port 4’s I/O address.

Onboard Serial Port 4 IRQ (G4H875-N only)

This field is used to select the serial port 4’s IRQ address. This field is not configurable if the “Onboard Serial Port 4” field is set to Disabled.

3.1.4.4 Onboard LAN Boot ROM

Enable this field if you wish to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly.

If you wish to change the boot ROM’s settings, type the <Shift> and <F10> keys simultaneously when prompted during boot-up. Take note: you will be able to access the boot ROM’s program (by typing <Shift> + <F10>) only when this field is enabled.

8 2