Intel G4H875-N, G4H875-B, G4H875-C user manual Hardware Installation, Front Audio

Hardware Installation

Front Audio

The front audio connector (J3) allows you to connect to the line-out and mic-in jacks that are at the front panel of your sys- tem. Using this connector will disable the rear audio’s line-out and mic-in functions.

Remove the jumper caps from pins 5-6 and pins 9-10 of J3 prior to connecting the front audio cable connector. Make sure pin 1 of the cable connector is aligned with pin 1 of J3. If you are not using this connector, make sure to replace the jumper caps back to their original pin locations.

Pins 5-6	and 9-10	short	The front audio is disabled.
(default)			The rear audio is enabled.
Pins 5-6	and 9-10	open	The front audio is enabled.
			The rear audio is disabled.

Driver Installation

Install the “Audio Drivers”. Refer to chapter 4 for more informa- tion.

2

43