Intel G4H875-N Hardware Installation LEDs, Dimm Standby Power LED, PCI Standby Power LED

Hardware Installation

2.6.11 LEDs

DIMM Standby

Power LED

PCI Standby

Power LED

12 ON

!
LED 1	LED 4
LED 2		LED 5

Diagnostic LEDs

DIMM Standby Power LED

This LED will turn red when the system’s power is on or when it is in the Suspend state (Power On Suspend or Suspend to RAM). It will not light when the system is in the Soft-Off state.

PCI Standby Power LED

This LED will turn red when the system is in the power-on, Soft- Off or Suspend (Power On Suspend or Suspend to RAM) state.

Important:

If the DIMM Standby Power LED or PCI Standby Power LED is lighted, you must power-off the system then turn off the power supply’s switch or unplug the power cord prior to installing any memory modules or add-in cards.

Diagnostic LEDs

The 4 diagnostic LEDs are used to indicate the current condition of the system. Refer to the table on the next page for a list of LEDs’ status and their corresponding system condition.

2

55