Intel G4H875-N 7.4 VCC3V, +12V, -12V, VCCV,VBATV and 5VSBV, Intrusion Events, Intrusion Detection

BIOS Setup

3.1.7.4 VCC3(V), +12(V), -12(V), VCC(V),VBAT(V) and 5VSB(V)

These fields show the output voltage of the power supply.

Note:

The onboard hardware monitor function is capable of detecting “system health” conditions but if you want a warning message to pop-up or a warning alarm to sound when an abnormal condition occurs, you must install the Hardware Doctor utility. This utility is included in the CD that came with the system board. Refer to the Hardware Doctor section in chapter 4 for more information.

3.1.7.5 Intrusion Events

When the system detected an intrusion event, a beeping alarm will sound alerting you of an intrusion event. Determine and settle the problem then perform the following steps to clear the instrusion event.

1.Restart the system.

2.Press <Del> to enter the BIOS setup.

3.Move the cursor to “PC Health Status” then press <Enter>.

4.Select the “Reset” option in the “Intrusion Events” field.

5.Press <Esc> to return to the main menu of the BIOS setup.

6.Move the cursor to “Save & Exit Setup” then press <Enter>.

7.Type “Y” and press <Enter>.

8.The system will restart with the intrusion event already cleared.

3.1.7.6Intrusion Detection

The system board provides real-time detection of any chassis intrusion events.To use this function, set this field to Enabled.

3

9 1