3 BIOS Setup 
3.1.5.3 Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS when it wakes up from the S3 state. This can be configured only if the “ACPI Suspend Type” field is set to “S3(STR)”.
3.1.5.4 Power Management
This field allows you to select the type (or degree) of power saving by changing the length of idle time that elapses before the Suspend mode and HDD Power Down fields are activated.
Min Saving | Minimum power saving time for the Suspend Mode |
| (1 hour) and HDD Power Down (15 min.) |
Max Saving | Maximum power saving time for the. Suspend |
| Mode and HDD Power Down = 1 min. |
User Define | Allows you to set the power saving time in the |
| “Suspend Mode” and “HDD Power Down” fields. |
3.1.5.5 Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank This selection will cause the system to turn off the vertical and horizontal synchronization ports and write blanks to the video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Initializes display power management signaling. Use this option if your video board supports it.
3.1.5.6 Video Off In Suspend
This field is used to activate the video off feature when the system enters the Suspend mode. The options are Yes and No.
3.1.5.7 Suspend Type
The options are Stop Grant and PwrOn Suspend.
8 4
