HP J3250M manual User Interface Parameters

HP Hub & Switch Management Admin

HP Admin Parameters

the attached devices appears. When the device symbol is in the executable state (a box appears around the symbol) and you double-click on it, a Closeup View of the device appears.

HP Admin gives you two check boxes in the Make Device Symbols Execut­ able at OpenView Startup section that allow you to change the state of the device symbols the next time OpenView is started. If the check box for Hubs/ Bridges/Switches is enabled (box is darker), the next time that OpenView is started the associated device symbols will be executable. If the check box is not enabled, the next time that OpenView is started the state of the symbols will not have changed. If the symbols were in the executable state when you exited OpenView, they will remain in the executable state. If the symbols were in the explodable state when you exited OpenView, they will remain in the explodable state.

Note: When an HP Admin check box is disabled, no change in the existing device symbol state occurs when OpenView is restarted.

Note: If you enable a Hub/Bridge/Switch check box while OpenView is running, the change in symbol state to executable will not occur until OpenView is restarted. OpenView checks these parameters at startup.

User Interface Parameters

User Interface parameters enable you to set the visual environment and object attributes in the HP Hub & Switch Management Device Views.

HP Hub & Switch Management Admin

10-7