HP J3250M manual Removing HP Hub & Switch Management, Installation Directories

Before Installing HP Hub & Switch Management for OV-UX

Removing HP Hub & Switch Management

Note: It is also a good practice to make a backup of your current OpenView application (especially your network map) before proceeding with the installation of new applications.

Installation Directories

The HP Hub & Switch Management product is installed in the following directories:

•/var/opt/HPASA

•/opt/HPASA

In compliance with the OSF standards, the /opt/HPASA directories hold the read-only files, which include all the executables, libraries, release notes, and Device Model Files. The /var/opt/HPASA directories contain the writeable directories such as product data directories. Be sure you have the required amount of free disk space before you install the products. You can make one of the following arrangements for the required space:

•having the required amount of disk space in /opt and /var

•mounting a dedicated volume for /var/opt/HPASA and

/opt/HPASA

•making /var/opt/HPASA and /opt/HPASA symbolic links to a file system with enough disk space.

The management system must have both manager and agent software installed.

Make sure the drive that you will be loading from is connected to the workstation and that your workstation is configured to recognize the CD- ROM drive.

Consult the README file on the HP Hub & Switch Management CD for installation procedures.

Removing HP Hub & Switch

Management

If necessary, you can remove products that you installed by using the command that is appropriate for your operating system. You must be logged on as root and you must remove them in the reverse order that you installed

Switch Management	Before Installing HP
for OV-	Hub &

2-5