HP J3250M manual Configuration System Information, Fault Detection Sensitivity Settings

Accessing Hub Features

Configuring Your Device

and faulty network interface cards. The Fault Detection page lets you set the sensitivity and actions that occur when a fault is detected on a port in your network. For hubs, you can set the sensitivity for logging network problems and disabling ports. The sensitivity settings are:

High Sensitivity: the device will act when a network problem of any severity occurs. Network problems are automatically detected and entered into the Alert Log.

Medium Sensitivity: the device will act when serious network problems occur.

Low Sensitivity: the device will act only when severe network problems occur. These are problems that may bring the network down.

Never: The device will never take any actions regardless of the severity of the problem.

Figure 6-3. Fault Detection Sensitivity Settings

Configuration - System Information

The System Information page lets you enter a system name for the device, the location of the device, and whom to contact in the event of a problem.

Accessing FHub eatures

6-7