Software Authentication Manager Commands on Cisco IOS XR Software
show sam certificate
show sam certificate
To display records in the certificate table, use the show sam certificate command in EXEC mode.
|
| show sam certificate {detail location | |
|
|
|
|
Syntax Description |
| detail | Displays all the attributes for the selected table entry (specified by the |
|
|
| |
|
|
|
|
|
| location | Specifies the certificates stored in a specific location. Use one of the following: |
|
|
| root, mem, disk0, disk1, or other flash device on router. |
|
|
|
|
|
| Index number for the entry, in the range from 1 to 65000. | |
|
|
|
|
|
| summary | Displays selected attributes for entries in the table. |
|
|
|
|
|
| all | Displays selected attributes for all the entries in the table. |
|
|
|
|
|
| location | Displays selected attributes for only the certificates stored in a specific location. |
|
|
| Use one of the following: root, mem, disk0, disk1, or other flash device on |
|
|
| router. |
|
|
| |
|
|
|
|
Defaults |
| No default behavior or values |
Command Modes
Command History
EXEC
Release | Modification |
Release 2.0 | This command was introduced on the Cisco |
|
|
Release 3.0 | No modification. |
|
|
Release 3.2 | This command was supported on the Cisco XR 12000 Series Router. |
|
|
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the show sam certificate command when you want to display all the certificates stored in the system. Attributes are certificate number, certificate flag, serial number, subject name, issued by, version, issuing algorithm,
To get the certificate number, use the show sam certificate summary all command. When used with the summary keyword, the all keyword displays selected attributes for all the entries in the table.
When used with the summary keyword, the location argument displays selected attributes for only the certificates stored in a specific location. Use one of the following: root, mem, disk0, disk1, or other flash device on router.
Cisco IOS XR System Security Command Reference