Cisco Systems SR-207 the sam prompt-interval command either proceed or, terminate, SR-227, Field

Software Authentication Manager Commands on Cisco IOS XR Software

show sam sysinfo

	Table 21	show sam sysinfo Field Descriptions
	Field			Description
	Status			One of the following: running or not running.
				If the SAM is not running, the System Manager should detect
				that state and attempt to restart the SAM. If problems prevent the
				System Manager from restarting the SAM after a predefined
				number of repeated attempts, the SAM will not be restarted. In
				such a case, you should contact Cisco Technical Assistance
				Center (TAC) personnel.
	Prompt Interval			Current setting for the prompt interval. The interval can be set in
				the range from 0 to 300 seconds. The value shown in the sample
				output (10 seconds) is the default.
	Prompt Default Response			Current setting that specifies the action taken by the SAM if the
				prompt interval expires before the user responds to the prompt.
				If the user does not respond to the prompt, the SAM waits for the
				specified interval to expire and then takes the action specified in
				the sam prompt-interval command (either proceed or
				terminate).
				Entering the sam prompt-intervalcommand with the proceed
				keyword causes the show sam sysinfo command to display
				“Yes,” meaning that the default action taken by the SAM is to
				wait for the prompt interval to expire and then respond as if it had
				received a “yes” from the user.
				Entering the sam prompt-intervalcommand with the terminate
				keyword causes the show sam sysinfo command to display
				“No,” meaning that the default action taken by the SAM is to wait
				for the prompt interval to expire and then respond as if it had
				received a “no” from the user.
Related Commands	Command		Description
	sam prompt-intervalSets the interval that the SAM waits after prompting the user for input when

it detects an abnormal condition and determines how the SAM responds when it does not receive user input within the specified interval.

Cisco IOS XR System Security Command Reference

SR-227