Cisco Systems Surveillance Media Server manual Upgrading VSMS, Procedure

Upgrading VSMS

Step 6 Restart the server.(

Shell> /etc/init.d/cisco restart).

Step 7 Open the Management Console and enter the license, and set the storage, PTZ, and other configuration information as needed.

Upgrading VSMS

To upgrade VSMS, follow these steps:

Procedure

Step 1 Extract the contents of the downloaded .zip file. Cisco recommends that you create a directory for the extracted contents.

shell> mkdir vses-6.1.0

shell> unzip Cisco_VSMS-6.1.0-xx-xxxxx.zip -d vses-6.1.0

Step 2 Verify that all files are present:

shell> cd vses-6.1.0 shell> ls -1

Cisco_VSBase-6.1.0-xx-xxxxx-i686.rpm Cisco_VSBWT-6.1.0-xx-xxxxx-i686.rpm Cisco_VSDocs-6.1.0-xx-noarch.rpm Cisco_VSDrivers-6.1.0-xx-xxxxx-i686.rpm Cisco_VSMS-6.1.0-xx-xxxxx-i686.rpm Cisco_VSRecorder-6.1.0-xxxxx-sp3-i686.rpm Cisco_VSVM-6.1.0-xx-xxxxx.i586.rpm Cisco_VSTools-6.0.0-noarch.rpm

Step 3 Stop the VSMS service:

shell> /etc/init.d/cisco stop

Step 4 VSDrivers must be removed prior to uninstalling Cisco_VSMS. Uninstall all previous MS modules including some (but not all) of the following based on the previously installed version:

shell> rpm -e Cisco_VSBWT

Installing and Upgrading Cisco Video Surveillance Media Server (VSMS)

12