Cisco Systems V110 manual Show modem operational-status

Last clearing of "show modem" counters never
23 incoming completes,		2 incoming			failures
0 outgoing completes, 0 outgoing failures
0 failed dial attempts, 0 ring no					answers, 2 busied		outs
0 no dial tones, 0 dial timeouts,					0 watchdog timeouts
0 no carriers, 0 link failures,				0	resets, 0 recover		oob
0 recover modem, 0 current fail				count
0 protocol timeouts, 0		protocol		errors, 0 lost events
0 ready poll timeouts
Transmit Speed Counters:
Connection Speeds		75	300		600	1200	2400	4800
# of connections		0		0	0	0	0	1
Connection Speeds	7200		9600		12000	14400	16800	19200
# of connections		1		4	0	3	0	8
Connection Speeds	21600		24000		26400	28000	28800	29333
# of connections		0		0	0	0	0	0
Connection Speeds	30667		31200		32000	33333	33600	34000
# of connections		0		0	0	0	0	0
Connection Speeds	34667		36000		37333	38000	38400	38667
# of connections		0		0	0	0	6	0
Connection Speeds	40000		41333		42000	42667	44000	45333
Receive Speed Counters:
Connection Speeds		75	300		600	1200	2400	4800
# of connections		0		0	0	0	0	1
Connection Speeds	7200		9600		12000	14400	16800	19200
# of connections		1		4	0	3	0	8
Connection Speeds	21600		24000		26400	28000	28800	29333
# of connections		0		0	0	0	0	0
Connection Speeds	30667		31200		32000	33333	33600	34000
# of connections		0		0	0	0	0	0
Connection Speeds	34667		36000		37333	38000	38400	38667
# of connections		0		0	0	0	6	0
Connection Speeds	40000		41333		42000	42667	44000	45333
# of connections		0		0	0	0	0	0
Connection Speeds	46000		46667		48000	49333	50000	50667
# of connections		0		0	0	0	0	0
Connection Speeds	52000		53333		54000	54667	56000
# of connections		0		0	0	0	0

show modem operational-status

Fields that have been added or changed for this command are:

Parameter #1 Connect Protocol: ISDN Mode

Parameter #8 Connected standard V.110

Parameter #41 V110 frames received bad:

Parameter #42 V110 frames received good:

Parameter #43 V110 frames transmitted:

Parameter #44 V110 sync lost:

The show modem operational-statuscommand example is as follows:

router# show modem operational-status 1/0 Modem(1/0) Operational-Status:

Parameter #0 Disconnect Reason Info: (0x0)

Type (=0 ): <unknown>

Class (=0 ): Other

6Cisco IOS Release 12.0(4)XI1