Cisco Systems WAP121, WAP321

Client Quality of Service

ACL

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 123

•Source MAC Address—Select this field and enter the source MAC address

to compare against an Ethernet frame.

•Source MAC Mask—Select this field and enter the source MAC address

mask specifying which bits in the source MAC to compare against an

Ethernet frame.

For each bit position in the MAC mask, a 0 indicates that the corresponding

address bit is significant and a 1 indicates that the address bit is ignored. For

example, to check only the first four octets of a MAC address, a MAC mask

of 00:00:00:00:ff:ff is used. A MAC mask of 00:00:00:00:00 :00 checks all

address bits and is used to match a single MAC address.

•Destination MAC Address—Select this field and enter the destination MAC

address to compare against an Ethernet frame.

•Destination MAC Mask—Enter the destination MAC address mask to

specify which bits in the destination MAC to compare against an Ethernet

frame.

For each bit position in the MAC mask, a 0 indicates that the corresponding

address bit is significant and a 1 indicates that the address bit is ignored. For

example, to check only the first four octets of a MAC address, a MAC mask

of 00:00:00:00:ff:ff is used. A MAC mask of 00:00:00:00:00 :00 checks all

address bits and is used to match a single MAC address.

•VLAN ID—Select this field and enter the specific VLAN ID to compare

against an Ethernet frame.

This field is located in the first/only 802.1Q VLAN tag.

STEP 5 Click Save. The changes are saved to the Startup Configuration.

NOTE To delete an ACL, ensure that it is selected in the ACL Name-ACL Ty pe list, select

Delete ACL, and click Save.