Manuals / Cisco Systems / Computer Equipment / Network Card

Cisco Systems WAP121, WAP321 manual Linux bridge interface in the wap device

Models: WAP121 WAP321

1 179
Download 179 pages 39.46 Kb
Page 56
Image 56

Administration

3

 

Packet Capture

 

 

 

 

 

STEP 7 Select the interface from which you need to capture packets. At the Wireshark popup window, next to the IP address, there is a pull-down list for you to select the interfaces. The interface can be one of the following:

Linux bridge interface in the wap device

--rpcap://[192.168.1.220]:2002/brtrunk

Wired LAN interface

--rpcap://[192.168.1.220]:2002/eth0

VAP0 traffic on radio 1

--rpcap://[192.168.1.220]:2002/wlan0

802.11 traffic

--rpcap://[192.168.1.220]:2002/radio1

At WAP321, VAP1 ~ VAP7 traffic

--rpcap://[ 192.168.1.220]:2002/wlan0vap1 ~ wlan0vap7

At WAP321, VAP1 ~ VAP3 traffic

--rpcap://[ 192.168.1.220]:2002/wlan0vap1 ~ wlan0vap3

You can trace up to four interfaces on the WAP device at the same time. However, you must start a separate Wireshark session for each interface. To initiate additional remote capture sessions, repeat the Wireshark configuration steps; no configuration needs to be done on the WAP device.

NOTE The system uses four consecutive port numbers, starting with the configured port for the remote packet capture sessions. Verify that you have four consecutive port numbers available. We recommend that if you do not use the default port, use a port number greater than 1024.

When you are capturing traffic on the radio interface, you can disable beacon capture, but other 802.11 control frames are still sent to Wireshark. You can set up a display filter to show only:

•Data frames in the trace

•Traffic on specific Basic Service Set IDs (BSSIDs)

•Traffic between two clients

Some examples of useful display filters are:

•Exclude beacons and ACK/RTS/CTS frames: !(wlan.fc.type_subtype == 8 wlan.fc.type == 1)

•Data frames only: wlan.fc.type == 2

•Traffic on a specific BSSID: wlan.bssid == 00:02:bc:00:17:d0

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

54

Page 55 Page 57
Page 56
Image 56
Cisco Systems WAP121, WAP321 manual Linux bridge interface in the wap device
Page 55 Page 57

WAP121, WAP321 specifications

Cisco Systems has long been recognized for its innovation in networking technologies, and the Cisco WAP321 and WAP121 access points are prime examples of its commitment to delivering reliable, high-performance wireless networking solutions for small and medium-sized businesses. These devices offer a robust set of features designed to meet the requirements of modern wireless networking while ensuring ease of use and deployment.

The Cisco WAP321 is a dual-band access point that operates in both the 2.4 GHz and 5 GHz frequency bands, providing flexibility and improved performance in crowded environments. With support for the 802.11n Wi-Fi standard, it boasts a combined data rate of up to 450 Mbps, enabling high-speed connections for multiple users simultaneously. The WAP321 also includes advanced features such as multiple SSIDs and VLAN support, allowing businesses to segment their networks for enhanced security and management control.

One of the standout characteristics of the WAP321 is its ability to act as a lightweight access point, meaning it can be managed through a Cisco Wireless LAN Controller (WLC) for larger deployments. This capability allows for centralized management of multiple access points, making it easier for IT administrators to deploy, configure, and monitor their network infrastructure.

On the other hand, the Cisco WAP121 is designed for those requiring a simpler, more cost-effective solution. This single-band access point also operates on the 2.4 GHz band but still provides robust performance with wireless speeds reaching up to 300 Mbps. It is ideal for small businesses looking to develop or expand their wireless networks without the complexities associated with more advanced systems.

Both models feature Power over Ethernet (PoE) capability, enabling them to receive power through the Ethernet cable, which simplifies installation and reduces the need for additional power outlets. Additionally, they support advanced security protocols, including WPA/WPA2 encryption, ensuring that sensitive data transmitted over the network remains protected from unauthorized access.

The ease of setup and user-friendly management interfaces of both the WAP321 and WAP121 make them appealing options for businesses lacking extensive IT resources. With features aimed at enhancing both performance and security, these access points represent powerful tools for achieving reliable wireless connectivity in a business environment. Whether organizations opt for the WAP321 for its extensive capabilities or the WAP121 for its simplicity, both access points reflect Cisco's dedication to meeting diverse networking needs.