Cisco Systems WRT54G manual Getting to Know the Wireless-G Broadband Router, The Back Panel

Wireless-G Broadband Router

Chapter 3: Getting to Know the Wireless-G Broadband Router

The Back Panel

The Broadband Router's ports, where the cables are connected, are located on the back panel.

	Figure 3-1: The Broadband Router’s Back Panel
Reset Button	There are two ways to reset the Broadband Router's factory defaults. Either press the Reset
	Button, for approximately ten seconds, or restore the defaults from the Password tab in the
	Broadband Router's Web-Based Utility.
Internet	The Internet port is where you will connect your broadband Internet connection.
1, 2, 3, 4	These ports (1, 2, 3, 4) connect the Broadband Router to your networked PCs and other
	Ethernet network devices.

Important: Resetting the Broadband Router will erase all of your settings (WEP Encryption, Wireless and LAN settings, etc.) and replace them with the factory defaults. Do not reset the Broadband Router if you want to retain these settings.

Power The Power port is where you will connect the power adapter.

Chapter 3: Getting to Know the Wireless-G Broadband Router 6

The Back Panel