Return to Table of Contents
6.Turn the crown to display the time difference.
7.After setting, return the crown to the normal position.
<Characters and Symbols Used in City Names>
•Letters of the alphabet (A to Z)
•Numbers
•Symbols
<Display Sequence>
When the crown is turned forward (clockwise), the display changes in the order of letters
When the crown is turned backward
<Order in which Registered Cities and Displayed>
The location having the same time difference among the 30 cities
<Canceling Registered Cities>
1.Turn the crown to set the mode hand to the zone setting [SET) mode.
2.When the crown is pulled out to the second click (city setting position), the watch enters the city name correction state.
3.Turn the crown to change the display of the registered city name to 4. After canceling registration, return the crown to the normal position.
15. ALL-RESET
When this watch indicates an abnormal display or does not function properly (no display, alarm continues to sound, etc.) as a result of being subjected to the effects of static electricity or strong impact and so forth, perform the
When performing the
<All-Reset Procedure>
1.Turn the crown to set the mode hand to the chronograph [CHR] mode.
2.Pull out the crown to the second click (0- position correction mode).
The second hand, minute hand, hour hand, 24 hour hand, UTC hour hand and
UTC minute hand rapidly advances to the 0 position stored in memory.
3.Press buttons (A) and (B) simultaneously and then release. All segments of the digital display are shown when either of the buttons is released.
Return to Table of Contents
