Citizen C650 manual Position Correction Setting to the Watch Base Position

Return to Table of Contents

O-Position Correction (Setting to the Watch Base Position)

When setting the 0-position of each hand, always make sure to turn the crown forward (clock- wise) to set each hand to its 0-position in the clockwise direction.

1.Turn the crown while in the normal position to set the mode hand to the chronograph [CHR] mode.

2.Pull the crown out to the second click (0-position correction position).

x The second hand, minute hand, hour hand, 24-hour hand, UTC hour hand and UTC minute hand rapidly advance to the position stored in memory.

x "HR" lights during digital display 2 indicating that the watch is in the correction state.

3.Turning the crown forward (clockwise) allows correction to be made in the positive direction. Turning the crown continuously allows the 0-position to be corrected continuously.

4.Pressing button (A) switches the correction location between "MIN" (minute hand) and "SEC" (second hand) each time it is pressed.

5.Turn the crown forward (clockwise) to align each hand at the 0-position at each correction location. Although correction can be made in the negative direction by turning the crown backward (counter-clockwise), always make sure to set the 0-position by turning the crown for- ward to ensure that the 0-position is set correctly.

x The 24-hour hand is corrected in conjunction with the hour hand.

x The UTC hour and minute hands are corrected in conjunction with the minute hand. • The second hand can only be corrected in the forward (clockwise) direction only. 6. After correcting, return the crown to the normal position.

After correcting the 0-position of each hand, reset the time, calendar and other modes before using the watch.

Note:

None of the buttons on the watch operate during movement of each hand. Operate the buttons only after the hands have stopped moving.

Return to Table of Contents