MEASURING YOUR BLOOD PRESSURE
1Wrap the arm cuff tightly around your
arm.
( 
See page 14 “ATTACHING THE ARM CUFF”.)
2 Plug the air hose connector into the main unit.
•Plug the air hose connector fi rmly into the air hose socket on the main unit as illustrated.
3Sit in the recommended position.
( 
See page 13 “ TIPS FOR OBTAINING ACCURATE MEASUREMENTS”.)
4Start measurement.
• Press the "START/STOP" switch.
The air pressure is increased and then slowly decreased. When a pulse is detected, the measurement icon 
starts fl ashing.
After the blood pressure measurement is taken, the systolic pressure, diastolic pressure and pulse rate are shown on the
display for 1 minute, after which the display turns off unless other instructions are given.
5Storing, recalling and erasing measurement data
•Storing data
As long as the unit functions correctly, the blood pressure and the pulse rate for the result with the record of the time and date are automatically stored in memory as one set of data.
Up to 48 sets of measurement data can be stored in the memory. If you measure your blood pressure when 48 sets of measurements have already been stored in memory, the earliest set of measurements is automatically deleted to make way for the new measurements.
English
