- Eng 20 -
English
HOW TO CALL UP THE VALUES STORED IN MEMORY TO THE DISPLAY
• Except for the case where the unit is engaged
in measurement, press “MEMORY” switch to
call up the values (measurement results) stored
in memory to the display.
* To erase all the data, remove the batteries. All
the stored data is erased.
• “A” that represents the average value appears on the
upper right section of the display. Then, the average
of the whole data stored in memory appears on the
display.
• Press the “MEMORY” switch.
HOW TO CALL UP THE DATA STORED IN MEMORY