5. Memory recall

You can recall stored data by pressing the “Memory” switch, except when performing a measurement.

Up to 99 sets of measurement results are auto- matically stored in memory, and memory cell No. 1 is always used to store the oldest set of results.

Press “Memory” switch, the memory cell num- ber with the stored measurement results (Sys- tolic / Diastolic and Pulse with Date/Time) are displayed for 1 minute.

* Pressing “Memory” button, nothing will appear on the display if there is no data in the memory.

If the “Memory” switch is pressed further, the old date are indicated in the order of the time series.

Press “Start/Stop” switch to turn off the unit.

6. Memory clear function

To clear memory data, take out the two batteries at same time and then press the “START/STOP” switch for a while. All memory is erased.

Press the “POWER/START” switch to turn off.

CAUTION

To discontinue a measurement for any reason, press the “POWER/START” switch. This causes the “wrist cuff” to deflate rapidly.

- Eng 12 -

Page 12
Image 12
Citizen ch607 instruction manual Memory recall, Memory clear function