- Eng 8 -
BATTERY REPLACEMENTCLOCK MODE1. To use this unit, you must install batteries, If
the battery mark “” is displayed, you
must change both batteries.
2. Open battery cover as illustrated. Replace the
two batteries, matching the (+) and (–) polari-
ties on each battery with the polarity marks
on the case.
•To take the batteries out easily, pull the trans-
parent ribbon.
3.“LR03” batteries or equivalent are suitable for
this blood pressure monitor. All batteries used
must be same type. Do not mix alkaline, stan-
dard (carbon-Zinc) or rechargeable (cadmium)
batteries. Also, do not mix old and new batter-
ies.
1. Default time indicating state and
selection of each mode
When the battery is installed, the time and date
are set as follows.
January 1 , 12:00:00 AM
2. Setting Date and Time
1) Press the “Mode” switch then “Month” starts
flashing and press “SET” button to set the cor-
rect month. (Each time the “Set” switch is
pressed, the value of the month is increased