English Español Português Français Pyсский 中文

AUTOMATIC POWER OFF FEATURE

After taking the blood pressure measurement, pressing the “START/STOP” switch will turn the monitor off. However, if you do not press the switch, the monitor’s Auto OFF function will automatically turn the monitor off after 3 minutes.

TIPS FOR OBTAINING ACCURATE MEASUREMENTS

Your blood pressure varies according to your posture, the time of day and a range of other factors. Ideally, you should measure your blood pressure in the same posture at the same time every day.

Taking measurements while sitting

1Place your arm on a table or similar surface with your forearm extended.

2 It is important to have the cuff level with your heart.

3Open your hand slightly on the table so that your palm is facing up and your

fingers are relaxed.

4Do not move your body or talk while taking the measurement.

Measurement in a reclining posture

* Relax yourself to avoid placing pressure on the cuff.

CALLING UP THE DATA STORED IN MEMORY

90 measurement results can be stored in Memory.

The average value is calculated automatically to help you manage your daily health.

Memory switch

1 Press the Memory switch once.

*Example of display when the Memory switch is pressed.

indicating the average value appears at the bottom of the display. Then the average value, based on the last three measurements, is displayed.

*( and the average value do not appear if there are two or fewer measurements stored in memory.)

SYS mmHg

DIA mmHg

 

 

 

 

 

 

SYS mmHg

DIA mmHg

MONTH / DATE

HOUR MINUTE

HT CATEGORY

Pulse/min

 

 

 

 

 

 

MONTH / DATE

HOUR MINUTE

HT CATEGORY

Pulse/min

2 If you press the Memory switch again, past measurement data are displayed.

Each time you press the switch, the measurement data are displayed in order from the most recent to the oldest.

*You can fast-forward the data numbers in display by pressing and holding the

Memory switch.

*Example of display when the Memory switch is pressed.

中文 Pyсский Français Português Español English

한국어

1Lie down, facing the celling.

2Lightly open your hand with palm up and straighten your arm.

3Relax your body, arm and fingers.

4Do not move your body or talk during measurement.

You may use your right arm to measure your blood pressure.

Blood pressure value is likely to differ by as much as 10 mmHg when measured on the right arm instead of the left (or vice-versa). Measure your blood pressure on the same arm each day.

SYS mmHg

DIA mmHg

 

MONTH / DATE

HOUR MINUTE

HT CATEGORY

/min

The data number is displayed before the measurement results.

SYS mmHg

DIA mmHg

MONTH / DATE

HOUR MINUTE

HT CATEGORY

Pulse/min

한국어

- Eng 15 -

- Eng 16 -

Page 9
Image 9
Citizen CHU503 Automatic Power OFF Feature, Tips for Obtaining Accurate Measurements, Calling UP the Data Stored in Memory