Citizen CHU503 Removing the Batteries, Time Adjustment, Using AC Adapter Option, Español

REMOVING THE BATTERIES

	•	When the icon	is displayed or nothing appears in the display, replace the old
English		batteries with four new ones. All four batteries should be changed at once.
		: The remaining capacity of the batteries is inadequate.
	• Adjust the clock after changing the batteries.
	•	The data stored in the memory is not deleted by changing the batteries.
	• Do not use rechargeable batteries.
	• Do not use alkaline (LR6) and manganese (R6P) batteries together.

TIME ADJUSTMENT

Setting the clock enables measurements to be accurately recorded.
The monitor can record the date and time of measurement as well as the	English
measurement results. Be sure to set the clock after inserting the batteries. Set the
date first and then the time.
* When you install the batteries for the first time, the monitor will display the
clock setting screen. You do not need to perform step 1. Proceed to step 2.
If you set the clock and change its setting, start from step 1.

Español	•	Batteries included are for demonstration purposes only. Battery life may be
		shorter than specified.
	•	When disposing of used batteries, comply with governmental regulations or
		environmental public institution’s rules that apply in your country/area.

USING AC ADAPTER (OPTION)

Português	Using the optional dedicated AC adapter (model:AC-230CZ) for the CITIZEN blood
	pressure monitor (CHU503) allows you to measure your blood pressure without
	having to worry about the amount of remaining charge in the batteries.
Français	Warning	The CHU503 and AC-230CZ should be used indoors in dry
		location.
	1 Insert the AC adapter plug into the socket on the blood pressure
	monitor.	AC adapter	mains power
			outlet
Py		plug		* Make sure there is no
				obstruction within the
сский				immediate vicinity of
				the AC adapter so that
	AC adapter		AC adapter	it can be immediately
	socket			unplugged from the
				mains power outlet.
中	2 Plug the AC adapter into a mains power outlet.
	• If you plan to use the AC adapter for an extended period of time, remove the
文
	batteries. If the batteries are left in the compartment, electrolyte may leak from the
	batteries and cause a fault in the blood pressure monitor.
	• It is recommended that batteries are in the unit when using the AC adapter. If
한	there are no batteries in the unit when the AC adapter is disconnected from either
	the power outlet or the unit itself, date and time settings will be lost.
국
	• Plug the AC adapter into the socket, where you can easily plug off soon and
어
	safely in times of trouble.

• When disconnecting the AC adapter, unplug the AC adapter from the main power outlet, and then unplug the AC adapter plug from the socket on the blood pressure monitor.

The dedicated AC adapter (model:AC-230CZ) for the CHU503 is optional.

The AC adapter is available from retailers stocking CITIZEN digital blood pressure monitors.

1 Press and hold the Date/Time Set switch for approximately two seconds.

The “year” indicator blinks.

2 Press the Adjust switch to adjust the “year”.

Press Adjust switch to increase the number by one. (The year can be adjusted in the range of 2013-2042.) Press Date/Time Set switch to confi rm the setting.

The “year” is set and the “month” indicator blinks.

*You can fast-forward the numbers in display by pressing and holding Adjust switch.

3 Press the Adjust switch to adjust the “month”.

Press Adjust switch to increase the number by one. Press Date/Time Set switch to confi rm the setting. The “month” is set and the “day” indicator blinks.

4 Press the Adjust switch to adjust the “day”.

Press Adjust switch to increase the number by one. Press Date/Time Set switch to confi rm the setting. The “day” is set and the “hour” indicator blinks.

5 Press the Adjust switch to adjust the “hour”.

Press Adjust switch to increase the number by one. Press Date/Time Set switch to confi rm the setting. The “hour” is set and the “minutes” indicator blinks.

6 Press the Adjust switch to adjust the “minutes”.

Press Adjust switch to increase the number by one. Press Date/Time Set switch to confi rm the setting.

The “minutes” are set and “12” (12-hour format) blinks.

한국어 中文 Pyсский Français Português Español

- Eng 9 - - Eng 10 -