Citizen ISO 9001 instruction manual Date/Time, Printing a Hard Copy of the Interface Settings

Designation	Display	Setting option
Print VARTEXTl	-S1- PRINT	0 = no, l = yes
	VERTEXT:	on statistics printout
Print VARTEXT2	-S2- PRINT	0 = no, l = yes
	VERTEXT:	on statistics printout
Print number of	-S3- PRINT READ	0 = no, l = yes
measurements	COUNT:
Print mean value	-S4- PRINT MEAN	0 = no, l = yes
	VALUE :
Print variation coefficient	-S5- PRINT STD.	0 = no, l = yes
	RELATIVE
Print sum of individual	-S6- PRINT	0 = no, l = yes
values	CUMMULATIVE:
Print standard deviation	-S7- PRINT STD.	0 = no, l = yes
	DEVIATION
Print minimum value	-S8-PRINT	0 = no, l = yes
	MINIMUM:
Print maximum value	-S9-PRINT	0 = no, l = yes
	MAXIMUM:
Print difference between	-S10- PRINT	0 = no, l = yes
maximum and minimum	DIFFERENCE:
values
Print date/time	-S11- PRINT	0 = no, l = yes
	DATE/TIME:

10

Application Settings
Program Vers.		1.xx	C
------------------------
S1:Print TEXT1		ON
S2:Print TEXT2		ON
S3:Print	n	0FF
S4:Print	X	OFF
S5:Print	srel	0FF
S6:Print	Σx	OFF
S7:Print	S	OFF
S8:Print	Min	OFF
S9:Print	Max	OFF
S10:Print	diff	OFF
S11:Print	date	ON

Interface Settings
Program	Vers.	1.xx	C
------------------------
Baud rate		1200 bd
Parity		Odd
Handshake		DTR/CTS
P1:Send	CR/LF	ON
P2:Print	format Right
P3:Decimal-Char		point
P4:Num.function		ON
P5:Inverse from 0FF
P6:Print	mode	Standard
P7:Date/Time		ON
P8:Print	TEXT1	OFF
P9:Print	TEXT2	OFF
C1:Time	format	24h
C2:Display		Time

HARD COPY OF THE STATISTICS MENU

§ To select the “Statistics Applications” menu,

-hold down the key when you start the printer; or

-hold down the key for more than 5 seconds during printer operation

-To print the settings, press the PRINT key

-To exit the “Statistics Menu” , press the key.

Printing a Hard Copy of the Interface Settings

§To select the “Interface Settings for the Data Printer” menu,

–hold down the PRINT key when you start the printer; or

–hold down the PRINT key for more than 5 seconds during printer operation.

§ To print the settings, press the PRINT key

>You will obtain the readout shown on the left (Example: these are the factory settings)

§To exit the “Interface Settings for the Data Printer” menu,

press the key

11