KEY TO DISPLAY ICONS
English
Icon displayed |
| Condition/Cause | |
|
|
|
|
| Displayed during | Lit | Measurement is under way. |
|
|
| |
| measurement. | Flashing | Pulse detected. |
|
| ||
|
|
|
|
| Displayed during | “PUL Err” is displayed when the pulse | |
| measurement. | value is below 40 or above 181. | |
|
|
|
|
If any of the following marks is displayed, take the specified action, then repeat the operation.
Icon displayed |
| Condition/Cause | Corrective action |
|
|
|
|
| • | Insufficient pressure. | Apply cuff properly and |
| • | Appears when the | measure again. |
|
|
| |
|
| not be measured |
|
|
| accurately. |
|
|
|
| |
| The pressure is 281 | If the pressure does not | |
| mmHg or higher. | automatically decline | |
|
|
| during measurement, |
|
|
| immediately press the |
|
|
| “START/STOP” switch |
|
|
| and turn the unit off. To |
|
|
| take the measurement |
|
|
| again, refer to P.16 |
|
|
| and correctly |
|
|
| pressure. |
| Appears when the | Replace the batteries. | |
| batteries are running low. |
| |
|
|
| |
| Detected problem in the | Contact the vendor. | |
| device. |
| |
|
|
|
|
