Setup

Part Names and Functions

1

4

 

2

5

 

3

6

 

7

1Front (winding side) ribbon tension adjustment knob

This is adjusted according to the width of the ribbon that is used. It is also used when the ribbon is wrinkled or slips.

2Front (winding side) ribbon left-right balance adjustment knob

It is used to perform an adjustment when the ribbon is wrinkled. Normally set it to the center position.

3Media width adjustment dial

It is adjusted to match the width of the media.

4Back (feeding side) ribbon tension adjustment knob

This is adjusted according to the width of the ribbon that is used. Use it basically in the same way as the front adjustment knob.

5Back (feeding side) ribbon left-right balance adjustment knob

It is used to perform an adjustment when the ribbon is wrinkled. Normally set it to the center position.

6Media thickness adjustment dial

It is adjusted to match the thickness of the media.

7Large blue-head open lever

The head unit can be raised to install media by pushing this lever. It locks the head unit during printing.

13