Appendixes
Replacing the Interface Board
Caution
Always turn off the power to the printer before replacing the interface board. Do not pull it out with unnecessary force. This will cause an accident.
Replacement Method
1.Remove the screws (2) that anchor the bracket of the interface board then pull the interface board towards you. When you do this, be careful not to perform any unreasonable operations that will damage the connecting cable and do not pull the cable too much. If you do, it will cause a malfunction.
Interface Board
Rear Side
Screw
Interface Cable
2.Remove the connecting cable from the interface board and reconnect the cable to the connector of the replacement interface board
Rear Side | Ethernet |
Interface Board
Interface Cable
58