zMaintenance cover

Not applicable for this product.

CAUTION

Do not open the maintenance cover.

Operation panel

LCD

LED Button 1 to Button 4

LOCK icon

PAPER LOW

 

 

 

 

Button 1 (FEED)

Button 4 (MENU)

Examples are shown in the diagram of the LCD above on the right.

zLCD

Indicates the printer’s status, button names, types of errors, and messages.

zLED

Lights green when the power is on, turns off when the power is off. Lights red in special modes and in case of errors.

Lights orange when paper is low (paper near-end) or the print head is hot.

zButton 1 to Button 4

Functions assigned to these buttons vary depending on the active mode. The buttons are called button 1, button 2, button 3, and button 4 in order from left to right.

zFEED button

Press this button to feed paper.

In case of a cutter lock, remove the cause of the lock and then press the FEED button.

Refer to 4.6 Error Messages

zMENU button

Press and hold this button (for at least two seconds) to access the memory switch setting mode.

Refer to 5.3 Manual Setting of Memory Switches

zPAPER LOW

Appears when the paper roll is near its end.

— 13 —