zLOCK icon

This icon indicates that the MENU button is inoperative.

LCD in the vertical or wall mounted position

You can change the memory switch settings to invert the LCD if the printer is used in a vertical position or installed on a wall.

Inverted image

Refer to 5.3 Manual Setting of Memory Switches

Rear connectors

Interface connector

Cash drawer

Power connector (AC adapter type)

kick-out

(serial, parallel, USB, etc.)

connector

External device connector

Protective seal

AC inlet (built-in power supply type)

zInterface connector (serial, parallel, USB, etc.) Connects to the interface cable.

The serial interface board is equipped with a DIP switch.

zCash drawer kick-out connector

Connects to the cable from the cash drawer.

zPower connector (AC adapter type) Connects to the AC adapter cable.

zExternal device connector

Connects to the cable from an external device.

*Remove the protective seal from the external device connector to use it.

zAC inlet (built-in power supply type) Connects to the AC power cord.

— 14 —