Citizen Systems CT830 instruction manual Care and CLEANING, Storage

Models: CT830

1 14
Download 14 pages 60.52 Kb
Page 10
Image 10

English

Caution

1.Remove and then reinstall the battery if the Er message is displayed, if the display is abnormal, or if nothing is displayed when the ON/MEM button is pressed.

2.To protect the environment, dispose of the used battery according to local regulations.

3.Remove the battery if the ear thermometer will not be used for a long time.

4.Keep the battery away from children.

CARE AND CLEANING, STORAGE

The probe is the most delicate part of the thermometer. Use caution when cleaning the probe lens to avoid damage.

Holding the thermometer too long may cause the probe to make a higher ambient temperature reading. This could make the body temperature measurement lower than usual.

After each use, clean the probe and probe lens with a cotton swab or soft cloth moistened with 70% alcohol.

Let the lens fully dry for at least 30 minutes.

Keep the unit dry and away from where it might be exposed to moisture, liquids, direct sunlight, high temperature, high humidity, or excessive dust.

Storing the thermometer at 10 to 40°C (50 to 104°F) allows you to measure body temperature at any time. Storing the thermometer below or above this temperature range may cause it to display Er 3. In such a case, leave the thermometer at 10 to 40°C (50 to 104°F) for at least 30 minutes before taking a measurement reading.

- Eng 10 -

Page 10
Image 10
Citizen Systems CT830 instruction manual Care and CLEANING, Storage