English
4. STOP WATCH:
(Stop watch mark)
Fig.11
4.1This mode counts from 0.01sec to 3 minutes.
4.2To start and stop the stopwatch, press the SCAN button. To reset the counter, press the ON/MEM button.
Press and hold the ON/MEM button and then press the SCAN button once to leave STOP WATCH mode and return to the EAR TEMPERATURE mode.
FEVER ALARM
If the thermometer detects a temperature over 37.5°C in the EAR TEMPERATURE mode, there will be a long beep followed by three short beeps to warn the user of a fever.
MEMORY
There are a total of 9 memory slots for recording EAR TEMPERATURE measurements. Each memory slot also records the date and time of the measurement. Memory slots can be cycled by pressing the ON/MEM button during the EAR TEMPERATURE mode (Fig.12).
(Memory mark)
Fig.12
NOTE: Even when a Memory slot is being displayed, users can measure ear temperature.
CELSIUS/FAHRENHEIT OPTION SWITCH
1.Make sure the thermometer is in
2.Press and hold the SCAN button, then immediately press the ON/MEM button. After 3 seconds, the °C icon will switch to the °F icon. (use same procedure to switch back to °C).
