Quick Installation and Configuration
Figure
The following figure shows the back panel of the SDX 11500/13500/14500/16500/18500/20500 appliance.
Figure
Configuration Requirements
Determine the following information for performing the initial configuration.
wNetScaler SDX IP address and subnet mask: The management IP address and the mask used to define the subnet in which the SDX appliance is located. This IP address is used to access the NetScaler SDX Management Service user interface.
wXenServer IP address: The IP address of the XenServer hypervisor.
wDefault gateway: The IP address of the router that forwards traffic out of the appliance’s subnet. The default gateway should be in the same subnet as the NSIP address.
4