Clarion BD416 owner manual Basic Operations

8. OPERATION

Note:

•Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).

English

Basic Operations

CAUTION

When this unit is turned on, starting and stop- ping the engine of a car with its volume raised to the maximum level may harm your hearing. Be careful about adjusting the volume.

Turning ON the Power and Adjusting the Volume

1)Press the POWER button 3.

*To turn off the power, press the POWER button 3 for 1 second or longer.

2)Press the FNC button 3 and select another

operation mode. Every time the FNC button 3 is pressed, the display changes the oper- ation mode as:

Radio ➜ CD ➜ Radio

Notes:

•The operation mode not connected to the unit will not be selected.

•If the CD mode is selected when no disc is inserted, the display shows “NO DISC”.

3)Turning the Rotary knob # clockwise increases the volume; turning it counterclock- wise decreases the volume.

*The volume level is from 0 (minimum) to 33 (max- imum).

Audio Mode Adjustments

Press the A-M button 2 to select the adjustment mode. The mode switches as follows each time the A-M button is pressed:

BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous mode

Adjusting the Treble

1)Press A-M button 2 and select “TREB”.

2)Turning the Rotary knob # clockwise empha- sizes the treble; turning it counterclockwise attenuates the treble.

*The factory default setting is “0”. (Adjustment range: –6 to +6)

3)When the adjustment is complete, press A-M button 2 several times until the function mode is reached.

Adjusting the Balance

1)Press A-M button 2 and select “BAL”.

2)Turning the Rotary knob # clockwise empha- sizes the sound from the right speaker; turn- ing it counterclockwise emphasizes the sound from the left speaker.

*The factory default setting is “0”. (Adjustment range: L9 to R9)

3)When the adjustment is complete, press A-M button 2 several times until the function mode is reached.

Adjusting the Fader

1)Press A-M button 2 and select “FAD”.

2)Turning the Rotary knob # clockwise empha- sizes the sound from the front speakers; turn- ing it counterclockwise emphasizes the sound from the rear speakers.

*The factory default setting is “0”. (Adjustment range: F9 to R9)

3)When the adjustment is complete, press A-M button 2 several times until the function mode is reached.

Adjusting the Bass

1)Press A-M button 2 and select “BASS”.

2)Turning the Rotary knob # clockwise empha- sizes the bass; turning it counterclockwise attenuates the bass.

*The factory default setting is “0”. (Adjustment range: –6 to +6)

3)When the adjustment is complete, press A-M button 2 several times until the function mode is reached.

Setting the Z-enhancer

This unit comes with three types of sound tone effects stored in memory. Select the one you prefer.

*The factory default setting is “Z-EHCR OFF”.

Each time you press Z-EHCR button 0, the tone effect changes in the following order. “Z-ENHANCER 1”➜ “Z-ENHANCER 2”➜ “Z-ENHANCER 3”➜ “Z-EHCR OFF”➜ “Z-ENHANCER 1”...

•Z-ENHANCER 1: bass emphasized

•Z-ENHANCER 2: treble emphasized

10 BD416