English

4. INSTALLATION

There are no moving parts in BLT573. However, caution must be taken to ensure minimum damage to the unit. Do not press, puncture or drop the unit at anytime. Install the unit where there is no direct sunlight, away from vents or high moisture areas and away from other vehicle electronic components. Mount BLT573 away from moving parts in the vehicle.

Using Velcro or Double-Sided Tape

Stick Velcro or Double-sided tape to the

BLT573.

Note:

In case of using Velcro or double-sided tape, make sure the unit will not fall down as this might damage the electronic component inside.

Floor

Velcro or 2-sided tapes

Using Screws

There are screws mounting holes in BLT573. Before drilling, make sure there are no hidden wires and parts that might be damaged.

! CAUTION

Improper wiring might damage BLT573 and

MAX973HD.

6BLT573