Clarion CZ509 owner manual Satellite Radio Operations

Satellite Radio Operations

This function is available when a Satellite Radio Receiver is connected through the CeNET cable.

This unit can control the following satellite radio receivers:

•XM Satellite Interface Adapter (Mini-Tuner Included) : CNP2000UC

Clarion cable for CNP2000UC : CNPCLA1

•SIRIUS Satellite Radio Receiver : SIRCL3

•SIRIUS Satellite Translator Adapter : CLA-SC1 (which needs Sirius universal Tuner sold separately.)

Notes:

•When the function is differ depending to the connected receiver, they are distinguished by the following notations:

“XM”: for an XM Satellite Radio Receiver

“SIRIUS”: for a SIRIUS Satellite Radio Receiver

•XM and the XM logos are trademarks of XM Satellite Radio Inc.

Selecting a Satellite Radio mode

1.Press the [SRC] button.

The system changes to the specified Satellite Radio mode.

Selecting a band

1.Press the [BND] button to select a band. This changes the reception band as follows:

•XM: XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...

•SIRIUS: SR1 ➜ SR2 ➜ SR3 ➜ SR1 ...

●Information displayed during reception The following information is displayed when the satellite radio cannot be received normally.

•When the receiver is turned on the first time or after a reset: “UPDATING”

•When a channel is being tuned in (no signal is yet received):

XM: “LOADING”, SIRIUS: “LINKING”

•A channel without a broadcast has been selected:

XM: “– – – CH”, SIRIUS: “INVALID CH”

•A channel not covered by your contract: XM: “UPDATING”, SIRIUS: “CALL 888” ↔ “539-SIRI” (alternated)

Confirming your SIRIUS ID

1.Press the [x] or [v] button to switch to channel 0.

2.Press the [DISP] button until the SIRIUS ID appears in the diaplay.

Displaying channel labels

1.Press the [DISP] button to select the desired channel label.

Channel ➜ Category ➜ Title (Artist) ➜ Radio text ➜ Channel...

Channel selection

1.Channels are selected with the [x] or [v] button.

∗For details, see the following operation descriptions.

Note:

•The audio output is muted and other button operations are not accepted during channel selection.

Tuning mode

There are two channel selection modes: quick tuning mode and step tuning mode.

●Quick tuning

1.Press and hold the [x] or [v] button (1 sec.).

●Step tuning

1. Press the [x] or [v] button.

Recalling a preset station

A total of 18 satellite radio stations can be stored.

•XM: 6-XM1, 6-XM2 and 6-XM3

•SIRIUS: 6-SR1, 6-SR2 and 6-SR3

This allows you to store your favorite satellite radio stations in memory for later recall.

1.Press the [BND] button to select the desired band.

2.Press the [ ] / [ ] button or [DIRECT] button to select the desired preset station.

English

CZ509 31