Clarion DB235 Basic Operations, Turning ON the Power and Adjusting the Volume, English

280-7881-00_Eng 11/19/02 10:11 AM Page 10

8. OPERATION

Note:

•Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).

English

Basic Operations

CAUTION

When this unit is turned on, starting and stop- ping the engine of a car with its volume raised to the maximum level may harm your hearing. Be careful about adjusting the volume.

Turning ON the Power and Adjusting the Volume

1)Press the [FNC] button.

*To turn off the power, press the [FNC] button for 1 second or longer.

2)Press the [FNC] button and select another operation mode. Every time the [FNC] button is pressed, the display changes the operation mode as:

Radio ➜ CD ➜ Radio

Notes:

•The operation mode not connected to the unit will not be selected.

•If the CD mode is selected when no disc is inserted, the display flashes “ NO DISC”.

3)Turning the [ROTARY] knob clockwise increases the volume; turning it counterclock- wise decreases the volume.

*The volume level is from 0 (minimum) to 33 (max- imum).

Audio Mode Adjustments

Press the [A-M] button to select the adjustment mode. The mode switches as follows each time the [A-M] button is pressed:

BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous mode

MAGNA BASS EX on and off

1)Press and hold the [A-M] button for 2 sec- onds or longer, then the Bass will extra boost.

Note:

•MAGNA BASS EX effect depend on volume level.

Adjusting the Bass

1)Press [A-M] button and select “BASS”.

2)Turning the [ROTARY] knob clockwise emphasizes the bass; turning it counterclock- wise attenuates the bass.

*The factory default setting is “0”. (Adjustment range: –7 to +7)

3)When the adjustment is complete, press [A-M] button several times until the function mode is reached.

Adjusting the Treble

1)Press [A-M] button and select “TREB”.

2)Turning the [ROTARY] knob clockwise emphasizes the treble; turning it counter- clockwise attenuates the treble.

*The factory default setting is “0”. (Adjustment range: –7 to +7)

3)When the adjustment is complete, press [A- M] button several times until the function mode is reached.

Adjusting the Balance

1)Press [A-M] button and select “BAL”.

2)Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

*The factory default setting is “0”. (Adjustment range: L13 to R13)

3)When the adjustment is complete, press [A-M] button several times until the function mode is reached.

Adjusting the Fader

1)Press [A-M] button and select “FAD”.

2)Turning the [ROTARY] knob clockwise emphasizes the sound from the front speak- ers; turning it counterclockwise emphasizes the sound from the rear speakers.

*The factory default setting is “0”. (Adjustment range: F12 to R12)

3)When the adjustment is complete, press [A-M] button several times until the function mode is reached.

10 DB335/DB235

280-7881-00