Clarion DB235 Radio Mode Operations, Setting the Z-enhancer, Switching the Clock Display, English

280-7881-00_Eng 11/19/02 10:11 AM Page 11

Setting the Z-enhancer

This unit comes with three types of sound tone effects stored in memory. Select the one you prefer.

*The factory default setting is “Z-EHCR OFF”.

Each time you press [Z-EHCR] button, the tone effect changes in the following order. “Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜ “Z-ENHANCER 3” ➜ “Z-EHCR OFF” ➜ “Z-ENHANCER 1”...

•Z-ENHANCER 1: bass emphasized

•Z-ENHANCER 2: treble emphasized

•Z-ENHANCER 3: bass and treble emphasized

•Z-EHCR OFF: no sound effect

Switching the Clock Display

Press and hold the [BND] button, and then press the [DISP] button to switch between the opera- tion mode and the clock display.

Setting the Clock

1)Press and hold the [BND] button, and then press the [DISP] button to display the clock display.

2)Press and hold the [BND] button, and then press the [DISP] button for 2 seconds or longer.

3)Press the [d] button, then set the current minute.

4)Press the [a] button, then set the current hour.

5)Press the [BND] button, then the clock is set.

Notes:

•If you select another operation mode while you are setting the clock, the clock setting operation will be canceled.

•If you remove the vehicle’s battery for a check or repair, the clock will be reset, so you must set it again.

Screen Saver mode

1)Press and hold the [BND] button, and then press the [SS] button to switch on, and off Screen saver mode

*The factory default setting is “SS On”.

Radio Mode Operations

FM Reception

For enhanced FM performance the ® tuner includes signal actuated stereo control and Multipath noise reduction circuits.

Listening to the Radio

1)Press the [FNC] button to select the radio mode, then the radio will be on.

2)To select a preset band, press the [BND] but- ton, then select one of the preset bands such as FM1, FM2, FM3, or AM. Every time the [BND] button is pressed, the display will change as:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1

3)Press the [a][d] button, then the station at which there is a broadcast will be selected (Seek selection).

Manual Tuning

1)Press the [BND] button, then select FM1, FM2, FM3 or AM.

2)Press and hold the [BND] button for 1 second or longer, then the display will show “MANU”, which means that a manual selection func- tion is on.

3)Press the [a][d] button and select the right station.

Seek Tuning

1)Press the [BND] button, then select FM1, FM2, FM3 or AM.

2)If the “MANU” on the display is on, press and hold the [BND] button for 1 second or longer. When the “MANU” display is off, the seek selection function is on.

3)Press the [a][d] button, then when it selects the station in which there is a broad- cast, it automatically stops.

English

DB335/DB235 11

280-7881-00