Radio Operations

onds or longer.

Recalling ISR

Press the [ISR] button and the display will show "ISR". Then the radio station previously memo- rized will be selected. Press the [ISR] button again to disengage the unit from the Recalling ISR function.

Area Change

Use this function when you are using the car stereo anywhere outside the U.S.

Switchable frequency spacing

This car stereo is initially set to tune in fre- quency intervals of 10 kHz for AM and 200 kHz for FM, the standard calibrations inside the U.S. When using the unit outside the U.S., use the following procedure to switch the frequency range.

 

Initial Setting

New Setting

 

(U.S. Standard)

(outside U.S.)

Frequency

10 kHz

9 kHz

spacing

 

 

AM

 

 

Frequency

530 to

531 to

range

1,710 kHz

1,629 kHz

Frequency

200 kHz

50 kHz

spacing

 

 

FM

87.9 to

87.0 to

Frequency

range

107.9 MHz

108 MHz

The table below lists the frequency specifica- tions for the U.S. and other countries.

Switching the area change

Outside U.S. (New Setting)

While pressing the [AM] button, press the [RPT] button, then "outside U.S." will be selected.

Inside U.S. standard (Initial Setting)

While pressing the [AM] button, press the [SCN] button, then the "U.S. standard" will be selected.

CD Mode Operations

Loading a CD

Insert a CD into the center of the CD insertion slot with the labeled side facing up. “LOAD" appears in the display, the CD enters into the slot and start play- ing.

CD SLOT

Notes:

Do not put your hand, fingers, or foreign objects into the CD insertion slot.

If a CD has already been loaded, another CD cannot be inserted. Do not insert another one forcefully.

Discs not bearing themark cannot be played with the unit. CD-ROMs cannot be played.

Some CDs recorded in CD-R/CD-RW mode may not be usable.

Listening to the Disc already Inserted

Press the [FNC] button to select the CD mode, the CD will start playing.

Stopping (pausing) Playback

While the CD playing pressing the [s] button will stop the CD and “PAUSE” indicate.

Press the [s] button again to resume play- back.

Ejecting the CD

Press the [Q] button, then the CD will be ejected.

Note:

If the ejected CD is left as it is, it will be reloaded after 15 seconds.

However, single CDs will not be reloaded, so make sure to remove them.

Top Function

Press the [BND] button, then the CD will start playing from the first song (track number 1).

English

DB245 13

Page 12
Image 12
Clarion DB346MP owner manual CD Mode Operations