English

7. REMOTE CONTROL

Remote control unit

Inserting the Batteries

1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow.

2. Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover.

Notes:

Using batteries improperly can cause them to ex- plode. Take note of the following points:

When replacing batteries, replace both batteries with new ones.

Do not short-circuit, disassemble or heat batteries.

Rear side

• Do not dispose of batteries into fire or flames.

 

Dispose of spent batteries properly.

 

AA (SUM-3, IECR-6/1.5V) Batteries

Rear cover

8 DB245

Page 7
Image 7
Clarion DB346MP owner manual Remote Control, Inserting the Batteries